different d

I'd like the heading to be in a different typeface from the text.

我希望标题和正文使用不同的字体。

This paper discussed the method of studying the deformation of the reflector surface with FEM, the technique of analysis the deformation of reflector surface with bottom support at different D, F/, h/ D and β;

论述了运用有限元技术研究镜面变形的方法及分析底支承在不同口径、焦比、厚径比和相对支承半径时镜面变形的技术；

The main works in this study are including: 1. To gain the load-displacement and load-strain curves by the measurement technique of displacement and strain using displacement sensors and strain gages on the six test vessels with different d/ D ratios under different loads.

在不同的接管纵向弯矩作用下，对不同结构尺寸的正交接管容器进行试验研究，测定结构关键部位的应变值和接管位移，通过绘制载荷位移曲线和载荷应变曲线研究其极限载荷。

The paper presents the measurement results of Strouhal number, St, for six rectangular cylinders with different d/ h ( d is section depth, h is section height).

本文给出了六种不同宽高比（d/h）截面柱体的Strouhal数（St）测员结果。

She looked different than I'd expected.

她看上去与我想象的不一样。

But when I'd qualified and started teaching it was a different story

可是等我获得资格开始教书的时候，却是另一番情形了。

Each room has a different d é cor and rates for January start at 69 euros, breakfast included.

每间客房装饰风格各有不同，1月份的房费69欧元起，含早餐。

Things might have been different if I'd talked a bit more.

如果当时我再多说一点的话，结果或许会不一样。

A series of parametric models with different d/ D, t/ T and D/ T were made to gain the empirical formula about limit loads of hot tapping models.

建立不同d/D、t/T和D/T的带压开孔管道有限元模型，计算出模型的极限载荷，通过回归分析得到极限载荷的经验公式，并进行验证和工程应用。

Suddenly it clicked ─ we'd been talking about different people.

我们突然领悟到原来我们谈论的不是同一个人。

An experimental study for 3 cylindrical shells with a different d/ D ratio opening nozzle was done. It's objective is to provide a detailed stress distribution in the vicinity of nozzle-cylindrical shells.

对接管纵向弯矩作用下3台具有不同d/D接管的圆柱形容器开孔结构进行了试验研究，考察开孔接管区的变形及其弹性应力分布情况。

The composition of the main equipments and technological advantages of modern Assel tube mills that are leading the world are introduced. The product quality with different D/ S ratio is analyzed from the technological characteristics, and the product location is put forward.

介绍了代表国际先进水平的现代Assel轧管机组的主要设备组成及工艺优势，从现代Assel轧管工艺的特点详细分析了不同D/S比值的产品质量状况，提出了现代Assel轧管机组的产品定位。

A study of experiment for 6 cylindrical shells with different d/ D ratio was done due to external loading on nozzle. Deformation and distribution of the stress were investigated in cylinder-nozzle intersection area.

对6台不同d/D比的圆筒形压力容器进行了接管外载荷作用下的试验研究，考察开孔-接管区的变形及其应力分布。